It is basic to apply grease appropriately when supplanting fuser film sleeves, and it is likewise critical to apply the correct sort of oil. Give us a chance to enable you to demystify the procedure for picking the correct oil/grease and set aside some cash.
Meaning of Fuser Film Sleeve grease
The grease is utilized to grease up fuser film sleeves. It is basic to apply grease appropriately when supplanting fuser film sleeves, and it is additionally critical to apply the correct kind of oil. On the off chance that off base grease is applied, the film sleeve may quit turning subsequent to printing for quite a while and cause paper jam because of dry out of the grease.
The short answer
With regards to buy oil for fuser film sleeves, it could be befuddling. To make the appropriate response short, HP-300 oil will work for a wide range of fuser film sleeves. Our HP-300 oil comes in two sizes, 2g (GRS-HP300-2G) and 20G (GRS-HP300-20G). For one fuser film sleeve substitution, 2g (GRS-HP300-2G) is adequate. 2G of HP-300 oil might be sufficient for two film sleeves all things considered. The drawback of HP-300 grease is that it is over the top expensive.
The itemized answer and it could possibly save you some money
At Petsmart, we carry two types of grease. One is completely fluorinated polymer oil called HP-300. Another sort is silicon-based oil. HP-300 oil is for rapid printers and fuser film sleeves with metal base, though silicon-based oil is for low to medium speed (5 ppm – 25 ppm) printers and fuser film sleeves with a polymer base. In below we have listed the ideal grease type for different fuser film sleeves.
Fuser film sleeve with metal base
The metal base sleeves are worked for more up to date models of printer, for example, HP LaserJet P4014, HP LaserJet Endeavor M601, HP LaserJet 4250, HP LaserJet 4300, and most shading printers, for example, HP Shading LaserJet 4700, HP Shading LaserJet CP2025, HP Shading LaserJet CP3525 and so on. These kinds of printers run quick and require increasingly proficient warmth move. Along these lines, the sleeves require oil that gives phenomenal execution under outrageous conditions.
- For metal-based fuser film sleeve, you should utilize HP-300 oil:
- GRS-HP-300 in 2G bundle – 2 gram oil is sufficient for 2 film sleeves.
- GRS-HP-300 in 20G bundle – 20 gram oil is sufficient for around 20 film sleeves.
Fuser film sleeve with polymer base
For more seasoned model printers, for example, HP LaserJet 1200, HP LaserJet 1300, HP LaserJet 2100, HP LaserJet 2200, HP LaserJet 2300, HP LaserJet 2400, HP Laserjet 4000, HP LaserJet 4100, HP LaserJet 6P and HP LaserJet 6L and so on., the fuser film sleeves are made with polymer base. These sorts of fuser film sleeves are reasonable for low to medium speed printers and just require oil that give great execution under moderately high temperature.
For polymer-based fuser film sleeve, silicon based oil is adequate:
- GRS-1.0 in 1 oz bundle – 1 oz oil is sufficient for 25 film sleeves.
- GRS-5.3 in 5.3 oz bundle – 5.3 oz oil is sufficient for around 130 film sleeves.
